Road Paints Suppliers Cheap Price Reflective High Index Thermoplastic Road Marking Paint Powder Glass Beads
Description of Thermoplastic Road Marking Paint
Thermoplastic paint is also known as hot melt marking paint.
It's a kind of paint that becomes fluid when heated and solidifies quickly when cooled. It's mainly used for road markings. The paint usually comes in solid form like pellets or blocks. When it's time to apply, it's heated to a molten state and then sprayed or spread onto the road surface. Once it cools down, it forms a durable, hard - wearing marking such as lane lines, crosswalks and other traffic - guiding symbols on the road.
How Long Does Thermoplastic Paint Take To Dry?
Thermoplstic road marking paint typically dries very quickly. It can solidify and be ready for use in just a few minutes (usually around 3 - 5 minutes). This is because it hardens as it cools after being applied in a molten state. However, factors like the thickness of the paint layer, ambient temperature, and air circulation can affect the exact drying time. In colder weather or with a thicker application, it might take a bit longer to fully set and reach its optimal hardness.
How Long Does The Adhesion Of Hot Melt Paint Last?
The durability of hot melt paint adhesion varies depending on several factors.
In ideal conditions such as on a well - prepared road surface with normal traffic, it can last for several years. For example, in a typical urban road setting with regular maintenance and moderate traffic volumes, the adhesion of hot - melt paint for lane markings and crosswalks can endure for about 1 - 3 years.
However, in harsher conditions such as heavy - traffic highways, in areas with extreme weather (e.g., very cold winters with freeze - thaw cycles or hot and humid climates), the adhesion might deteriorate more quickly. Heavy snow - plowing, abrasive action of vehicle tires, and exposure to chemicals (like de - icing salts) can reduce the effective adhesion life to a few months or even less in some cases.
Detailed Process of Hot Melt Road Line Paint Construction
1. Prepare the Surface
- Cleaning: Ensure the surface is free of dirt, grease, oil, dust, and loose debris.
- Repair: Fix cracks or uneven areas to create a smooth surface.
- Drying: The surface must be dry to ensure proper adhesion
2. Mark the Layout
- Use chalk, tapes, or temporary markers to outline the areas to be painted (lines, symbols, or shapes).
- Verify measurements against specifications or local standards.
3. Heat the Thermoplastic Paint
- Use a melting kettle or thermoplastic preheater to melt the paint.
- Heat to the recommended temperature, typically 180–220°C (356–428°F).
- Avoid overheating, as it may degrade the paint and affect quality.
- Stir continuously to ensure uniform consistency.
4. Primer Application (if required)
- Apply a primer to the surface if recommended by the manufacturer.
- This is especially needed for non-porous surfaces like concrete or asphalt.
- Allow the primer to dry before applying the paint.
5. Apply the Paint
- Screed Method: Use a screed box to create uniform thickness for road markings.
- Spray Method: Use a spray machine for even application on large or irregular areas.
- Extrusion Method: For thicker, raised markings.
- Hand Application: For small areas or repairs, manually pour and spread the molten paint.
- Preformed Thermoplastic: Lay pre-cut sheets or symbols on the surface and heat with a propane torch until adhered.
6. Check and Correct
After the coating is completed, check and correct the line shape, check the spread of glass beads, etc.
After confirming that it is correct, the construction site will be cleaned up.
After the line is dried and hardened, the relevant construction equipment can be transferred, the safety facilities can be dismantled, and the traffic can be opened.
| Customized Formula |
| Customized Formula | Content(Customized range) | Characteristics |
| C5 Resin | 10%-22% | Fluidity Toughness Hardness Adhesion |
| Titanium Dioxide | 0.5-10% | 0.5%-30% |
| Premixed glass beads | 0%-30% | Reflective after surface wear |
| Calcium Carbonate Sand | 30%-80% | Whiteness Wear-resistant Hardness |
| PE Wax | 1%-1.5% | Cold and heat resistant |
| EVA | 0.5%-1% | Crack resistance |
| Plasticizer | 1%-1.5% | Toughness |
Advantages of Hot Melt Paint
- High Durability
It has excellent abrasion - resistance and can withstand repeated friction and pressure from vehicles and pedestrians. It can maintain a good appearance for a long time even in areas with heavy traffic. For example, on the lane markings of a highway, it's not easy to wear out even after a large number of vehicles have passed over it.
- Quick - drying
It dries fast and can be put into use shortly after application. This is very important in road construction as it can reduce the impact on traffic.
Disadvantages of Hot melt Paint
- High - temperature Dependence for Application
It usually requires high - temperature equipment for application. Special heating tools are needed to melt the paint before use. If the temperature is not well - controlled during the heating process, it may affect the quality of the paint, such as its fluidity and adhesion.
- Difficult to Remove or Modify
Once applied and solidified, it's quite difficult to remove or modify. If there is a need to change road markings or remove the paint from a surface, it often requires special tools and complex procedures. Compared with some water - based paints, hot - melt paint is more stubborn in this regard.
How to Select Suitable Thermoplastic Paint
Choosing the right thermoplastic paint for road marking depends on several factors to ensure durability, visibility, and compliance with standards. Here are the key considerations:
1. Application Environment
- Climate Conditions: Consider weather conditions such as temperature, humidity, and rainfall. Some paints are specifically formulated for extreme temperatures or high-moisture areas.
- Traffic Volume: High-traffic areas require more durable paints with better wear resistance.
- Surface Type: Ensure compatibility with the road surface material (e.g., asphalt or concrete).
2. Performance Requirements
- Durability: Select a paint with high resistance to wear and tear, especially for heavy-traffic roads.
- Reflectivity: Opt for paints that allow for the embedding of glass beads to enhance nighttime visibility.
- Skid Resistance: For safety, especially in wet conditions, choose paints with anti-skid properties.
3. Compliance with Standards
- Check if the paint complies with local regulations and standards for road markings, such as color, thickness, and reflectivity.
4. Application Method
- Some paints are designed for specific application methods, such as spray, screed, or extrusion. Choose paint compatible with your equipment.
5. Color and Visibility
- Select colors with high contrast to the road surface (e.g., white, yellow) and UV-stable pigments to prevent fading.
6. Drying Time
- In high-traffic areas, choose a fast-drying formula to minimize disruption.
7. Cost Efficiency
- Balance initial cost with long-term performance. High-quality thermoplastic paint might have a higher upfront cost but longer durability, reducing maintenance expenses.
8. Supplier Reliability
- Purchase from reputable manufacturers or suppliers who provide quality assurance, technical support, and consistent product performance.
By considering these factors, you can choose thermoplastic paint that meets your project’s specific needs and ensures long-lasting, high-quality road markings.
Product Tags:
|
|
Road Paints Suppliers Cheap Price Reflective High Index Thermoplastic Road Marking Paint Powder Glass Beads Images
|
